Tattoo Stencil Size and Print Size Calculator
Convert stencil measurements or image pixels to print dimensions, and estimate how many A4 or US Letter sheets an actual-size StencilScale PDF will use.
Artwork dimensions and sheet count
Use these sample dimensions to try the calculator. Measure your own placement before printing.
- A4
- US Letter
Portrait sheets with 6 mm overlap, using StencilScale’s PDF margins.
Pixels and DPI to print size
Millimeters = pixels ÷ DPI × 25.4. For example, 2400 px at 300 DPI prints at 203.2 mm (8 in).
Measure the finished linework
Measure the space you want the stencil to cover. For a paper mockup, mark both ends of the design and measure the widest part across those marks. Measure the perpendicular height too if you want to estimate the paper count. The example dimensions in the calculator are starting points for a paper proof. Check your own placement on the intended area, since the same design can run in different directions or wrap around a curved surface.
Use the dimensions of the visible artwork after you trim any blank border. For an image with only a pixel width, divide that width by the DPI you plan to print at. For example, 2400 pixels at 300 DPI gives 8 inches, or 203.2 mm. Use the pixel height in the same calculation to get the other dimension at the same resolution. Changing the DPI used in this conversion changes the target size and keeps the pixel count the same.
Find out why a stencil printed at the wrong size
Match the A4 or US Letter selection in the PDF to the print settings and the paper you load. Automatic fit and borderless enlargement can both change the scale. Choose Actual Size or 100% when your print program offers those settings. The sheet counts above follow StencilScale's portrait PDF layout with margins, room for a sheet label, and 6 mm of repeated artwork at every shared edge. Check the editor preview with the real artwork before you export.
Check the 50 mm calibration line
Open the saved PDF and print the first sheet on compatible proof paper. Place a ruler against the calibration line and measure from endpoint to endpoint. If it measures 48 mm, the print came out at about 96% of the selected size. Correct the scaling or the paper size in your print app and make another proof. Check a recognizable feature for orientation at the same time. Actual-size printing guide.
Use a known width directly in the editor
If you measured the finished width in millimeters or inches and have the image ready, enter it directly in the StencilScale editor. It follows the proportions of the trimmed artwork to set the height and shows the sheet count. The editor accepts widths from 10 to 1,000 mm and exports up to 24 sheets for one size. For a tiled design, align the shared linework across the 6 mm overlaps after checking the scale on paper.